HackteriaLab 2014 - Materials

From Hackteria Wiki
Jump to: navigation, search

<- back to main page of HackteriaLab 2014 - Yogyakarta

How to art-sci.JPG

We will provide a basic temporary lab infrastructure for general crafting activities, simple biology, diy electronics (parts, tools and pcb making).

Basic Infrastructure

A living list of infrastructures, parts and tools is constantly updated here...

and check the in-progress inventarsi of lifepatch lab

Basic tools

  • walkie talkie : 6 Unit

Walkie talkie.jpg



Needed Material list to update


Urgent Orders

Participants are bringing

We strongly rely on all participants to bring some of their own equipment to work on their projects efficiently, share it's use with all others and make this HackteriaLab an enjoyable and productive collaborative jam session.

Hans Muster

I can bring the following:

  • a space ship
  • polar bear
  • a bag of single-walled carbon nanotubes

Get Locally

see the Yogya for Geeks to find the local stores. And yes, you can smoke in most of the stores :-)


Some electronic parts are very easy to get locally, while others are almost impossible. Make sure you order your specialized stuff online in time. ordering to Indonesia is generally difficult, stuff gets stuck at customs, long delivery time etc...


  • 100 x Pink LEDs
  • 3 x power supplies
  • 1 x Bench Lab Power Supply
  • x maybe more soldering irons?

General Tools

  • 1 x small Akku-drill/screwdriver
  • 1 x Jig-Saw
  • 2 x decent saws
  • 2 x Precision screw driver set

Lab supplies

There is lab supply stores in town to get all plastic and glassware. some chemicals are really hard to get, due to security restrictions in Indonesia.

  • 200 x plastic petri dishes
  • 1 kg NaSO4
  • 200 g CaCl2
  • Disposable Plastic Pipettes: 50 pieces

Plastic Pipettes.jpg

  • 50 ml Plastic Tube: 100 pieces

50ml tube.jpg

  • First Aid-Kit

Seeed Material Sponsor

http://www.seeedstudio.com/depot/Grove-GSR-p-1614.html $9.90 x 2 GSR, standing for galvanic skin response, is a method of measuring the electrical conductance of the skin. Strong emotion can cause stimulus to your sympathetic nervous system

http://www.seeedstudio.com/depot/Grove-125KHz-RFID-Reader-p-1008.html $12.90 x 2 The Grove-125KHz RFID Reader is a module used to read uem4100 RFID card information with two output formats: Uart and Wiegand. It has a sensitivity with maximum 7cm sensing distance.

http://www.seeedstudio.com/depot/Grove-EMG-Detector-p-1737.html $48.00 EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino

http://www.seeedstudio.com/depot/Arch-GPRS-p-1657.html $43.92 x 2 (ok bgt) Arch GPRS is similar to Seeeduino Arch, it also use Microcontroller LPC11U24. So you can use mbed compambed C/C++ SDK, libraries and optimizing online development tools to rapidly build a prototype. Arch GPRS is also a wireless network module based on EG-10, it can achive remote data colletion function to communicate with outside world by GPRS network. Arch GPRS has standard Arduino interface and Grove connectors. It’s convenient to connect existing Shields and Grove products to Arch GPRS. You can use the solar panel to charge for battery, and own to its low-power design, so Arch GPRS can work normally in outdoor.

http://www.seeedstudio.com/depot/LiPo-Rider-Pro-p-992.html $14.95 x 2 --> solarpanel charge controller for arduino Power your favorite electronic kit with green energy! The LiPo Rider Pro is a promotion of LiPo Rider.It supply heavier load output than LiPo Rider. The LiPo Rider Pro board allows you ride the solar wave to run your favorite 5V device

http://www.seeedstudio.com/depot/Seeeduino-ADK-Main-Board-p-846.html $49.00 x 2 ( > arduino mega) --> seeduino + android development kit Seeeduino ADK Main Board is based on Android Open Accessory Development Kit(ADK). Compared to the Google's ADK Reference design, Seeeduino ADK has many added features like support of both 5V and 3.3V I/O (logic with a switch), smaller form-factor, better placement of reset button, pads for more pin-headers and sparkling RED PCB with Golden finish. Using ADK Main Board build your own Mobile accessories. Open Source Android development platform and Seeeduino ADK Main Board is an ideal solution for mobile based Home Automation

http://www.seeedstudio.com/depot/Grove-Gas-SensorO2-p-1541.html?cPath=25_27 $59.00 Grove-Gas Sensor (O₂) is a kind of sensor to test the oxygen concentration in air, which is based on the principle of the electrochemical cell to the original work. You can know clearly the current oxygen concentration when you output voltage values proportional to the concentration of oxygen and refer to the oxygen concentration linear characteristic graph. It’s very suitable for detecting oxygen concentration in the environment protection


grove gas sensor: http://www.seeedstudio.com/depot/s/grove%2Bgas.html?search_in_description=0

http://www.seeedstudio.com/depot/Grove-433MHz-Simple-RF-link-kit-p-1062.html http://www.seeedstudio.com/depot/Grove-3Axis-Digital-Gyro-p-750.html http://www.seeedstudio.com/depot/Grove-Air-quality-sensor-p-1065.html http://www.seeedstudio.com/depot/Grove-Barometer-Sensor-p-1199.html http://www.seeedstudio.com/depot/Grove-Encoder-p-1352.html http://www.seeedstudio.com/depot/Grove-UV-Sensor-p-1540.html

xadow small leonardo compat arduino with plugin modules software https://github.com/reeedstudio/xadow

oled 0.96 inch http://www.seeedstudio.com/wiki/OLED_Frame

, pressure, uv, storage, breakout , motor controller, GettingtogripwithXadow